54-59mm Mechanical Turbocharger Fuel Saver Intake Modified Accelerator Car-Styling Fit For 1.6L / 1.8L / 2.0L Displacement

$54.00 $27.00

SKU: LEC1332 Category:

More than 50000+ customers have chosen Car Detailing Supplies to buy. We promise you the high quality !


Item Weight: 60g

Special Features: Fuel Saver

Material Type: Stainless steel

For Vehicle Brands/Model: Audi

Audi Model: 200

Country/Region of Manufacture: China

Item Height: 54-59mm

Item Width: 54-59mm

Item Length: 54-59mm


Please note when buying:

Please pay attention to the displacement model:
1.6L / 1.8L / 2.0L normal diameter 59-54mm;
Japanese and German series:
2.5L four-cylinder commonly used specifications 60-65mm;
2.5L six-cylinder commonly used specifications 67-72mm;
3.0L-4.0L with conventional format 73-78mm
car 2.0L commonly used specifications 60-65mm,
1.4 The following common specifications 41-46mm / 48-53mm
The above as a reference, when installed, the best measurement of air filter inlet pipe diameter shall prevail.

Product Features

1. improve air fuel ratio

The vortex swirling vortex is quickly pushed into the cylinder, increasing the instantaneous intake pressure and oxygen content of the air to achieve complete combustion, thereby achieving the maximum combustion effect with the least fuel. In order to improve the air fuel ratio. The 50 states use test, the maximum combustion ratio increased by 25%.

2. enhanced power
The same principle is to strengthen the perfect mixture of fuel and air to make the fuel particles more refined. The rapidly rotating combustion mode, improve engine power, reduce knocking phenomenon. According to the test of the world authority, the combustion rate in the combustion chamber can be increased by 80% and the engine power can be increased by 40%.

3. reduce pollution
As the air fuel ratio is greatly increased, the carbon monoxide (HC) and carbon monoxide (CO) produced by incomplete combustion are controlled. So it has a significant effect on preventing air pollution

4. reduce noise
This product is static under the production of rotating air flow, no noise. Due to the full combustion and power enhancement, it will undoubtedly change the running state of the engine. The noise is obviously reduced and the ride is more comfortable.

5. prolonging vehicle life
The burning is full and the carbon accumulation in the cylinder is greatly reduced. The piston, piston ring and working wear of the cylinder are reduced, and the maintenance cycle can be lengthened in addition to prolonging the life of the engine and reducing the failure of the power transmission system.

6. improve braking force and induction
Safety. To improve the induction, the vaporizer and the TBI engine can bring the effect of MPI.

7. improve the starting property
Cold car start more smoothly in winter, the use of air conditioning power in the summer no less.

8. safe and harmless safety and free pollution
Add new storm power to accelerate the fuel economizer, do not change the structure of the engine and car body, do not damage the engine, do not damage the original vehicle oil circuit and other accessories, will not cause any public nuisance.

Frequently Asked Questions:

1, size do not know how much?

Dear dear: Due to the car models are more, each car has a variety of sizes, with different models of different models produced by the throttle, air filter assembly, exhaust pipe, intake pipe size is different, First measure the size of the installation and then select the appropriate fuel economy for installation.

2, where installed?

There are two installation options: one in the throttle, air filter assembly installed in each one (see the physical installation diagram.) Second: exhaust muffler in the exhaust pipe installed behind each (due to the different design of the muffler to be installed two To three).

3, into the leaves will not fall into the cylinder?

No: The materials used in our products are all made of imported mild steel 316 Titanium, the blades are welded on the steel, the blades will not drive and the blades have a certain angle, so as to change the direction of the intake air to enhance the power, All blade welding machine used to ensure the quality of welding and stable, there will be no leaves fall into the cylinder situation!

4, loaded will go loose?

Measure the inner diameter of the throttle and the inner diameter of the air filter assembly Select the appropriate fuel economizer to install the product itself with a flexible, 5mm size range, can be securely stuck throttle and air filter assembly, product belt There are ””U”” shrapnel, you can ””U”” -shaped shrapnel outward with a batch move out to catch the throttle (see the throttle installation diagram).

5, installed really have a role?

Packing list


Additional information


44-49mm, 50-55mm, 62-67mm, 68-73mm


There are no reviews yet.

Be the first to review “54-59mm Mechanical Turbocharger Fuel Saver Intake Modified Accelerator Car-Styling Fit For 1.6L / 1.8L / 2.0L Displacement”

Your email address will not be published. Required fields are marked *